Titlebook: Rare Metal Technology 2018; Hojong Kim,Bradford Wesstrom,Xiaofei Guan Conference proceedings 2018 The Minerals, Metals & Materials Society

Occupation

寬敞

Conference proceedings 2018n. Topics include the extraction and processing of elements such as antimony, arsenic, gold, indium, palladium, platinum, rare earth metals including yttrium and neodymium, titanium, tungsten, and vanadium. Rare processing techniques are covered, including direct extraction processes for rare-earth

DIS

Selective Oxidation of Cerium in Rare Earth Solutions, a Comparison of Four Oxidants the goal of improving cerium removal whilst minimizing REE and reagent losses. The effect of oxidant type and dosage, pH, cerium concentration, and temperature on the kinetics of the process will be discussed.

按時(shí)間順序

offense

疲憊的老馬

Study of the Mechanochemical Calcification for Mixed Rare Earth Concentrate, the leaching yield of rare earth reached to 92.16%, Ce was 86.47%, La was 97.58%, Nd was 99.99% and the mass fraction of F, P entering into calcified liquor were 8.27, 0.21% respectively. The micromorphology of the mineral has a transition from dense to fluffy, and then became dense again.

古老

Electrochemical Formation of Tb Alloys in Molten LiCl–KCl Eutectic Melts and Separation of Tbined at 1.60?V for 3?h was Ni. Alloy samples were prepared by potentiostatic electrolysis at 0.50–0.80?V for 1?h using Ni plate cathodes in a molten LiCl–KCl containing TbCl. (0.50?mol%) and NdCl. (0.50?mol%). The highest mass ratio of Tb/Nd in the alloy sample was 56 at 0.70?V.

粗魯?shù)娜?/a>

Cyclone Electrowinning of Antimony from Antimonic Gold Concentrate Oresomic profit of CE was 33.1% higher attributed to the high current efficiency of CE. In addition, CE could adapt to high current density. All these characteristics indicate the CE method can be implemented commercially for processing antimonic gold concentrates.

壕溝

Electrodeposition of γ-MnO2 from Manganese Nodule Leach Liquor: Surface Modification and Electrochem drastically decreased the current efficiency (CE) and increased the energy consumption (EC) during electrodeposition. Under the optimum CTAB concentration of 100?mg?dm. the obtained CE and EC values were 87.64% and 1.70?kWh/Kg respectively.

chisel