Titlebook: High-Speed System and Analog Input/Output Design; Thanh T. Tran Textbook 2023Latest edition The Editor(s) (if applicable) and The Author(s

promote

https://doi.org/10.1007/978-3-031-04954-5DDR memory; Electromagnetic Interference; High-speed DSP; Phase-Locked Loop; Printed Circuit Board; analo

領(lǐng)導(dǎo)權(quán)

978-3-031-04956-9The Editor(s) (if applicable) and The Author(s), under exclusive license to Springer Nature Switzerl

顛簸下上

USB 3.1 Channel Design,USB 3.1 is one of the latest industry standards which operates up to 10?Gbps speed. Designing USB channel requires extensive .-parameter simulations and running compliance tests. This chapter shows an example of how to use HyperLynx SERDES Compliance Wizard [1] tool to develop and simulate USB 3.1 channel, and to check USB compatibility.

沙文主義

Thanh T. TranPresents a practical hands-on approach to high speed system design.Provides design for low noise and radiation by proper printed circuit board floor planning and stackup.Presents designs and simulatio

類似思想

AVOW

Gobble

–吃

Analog Filter Design,ystems, there are analog filters required for signal conditioning and limiting the bandwidth before sampling. To design these filters, designers need to be knowledgeable about operational amplifiers, DC biasing circuits, AC-coupling techniques, and traditional passive components like inductors, capacitors, and resistors.

冒號(hào)

Reclaim

Phase-Locked Loop (PLL),itting and receiving to and from externals, respectively. The input clock to the PLL is much lower than the DSP maximum clock frequency. PLL is typically used as a frequency synthesizer to generate the clock for the DSP core. For example, the input clock to the 1.2?GHz DSP [1] is 66?MHz.