Titlebook: Experimental and Numerical Investigations in Materials Science and Engineering; Proceedings of the I Nenad Mitrovic,Milos Milosevic,Goran M

Plaque

TGA-DSC-MS Analysis of Pyrolysis Process of Various Biomasses with Isoconversional (Model-Free) Kineby simultaneous thermal analysis (STA), coupled with mass spectrometry (MS). Thermal decomposition of these samples was divided into three stages corresponding to removal of water, devolatilization, and formation of bio-char. It was found that differences in thermal behavior of the samples are due t

Popcorn

確認

Experimental Investigation of Mechanical Properties on Friction Stir Welded Aluminum 2024 Alloyere conducted on the welding machine, built on the base of the conventional, vertical milling machine. The goal of the research was to know the relationship between welding parameters and mechanical and microstructural properties of 2024 joints. The following welding parameters were used: the rotati

微枝末節(jié)

Possibility for Removing Products of Thermal Degradation of Edible Oil by Natural Aluminosilicates chemical reactions. In this paper, the degree of thermal degradation of edible oil was investigated when heating oil at a temperature ranging from 110 to 190?°C for 10 and 30?min. The reference to the quality of edible oil is the content of free fatty acids (FFA) which increases as the temperature

來自于

無孔

勛章

SNEER

終點

Research of Lean Premixed Flame by Chemiluminescence Tomographynd the flame structure is investigated. The position of flame front, represented by the area with highest rate of exothermic chemical reactions, is deduced from the acquired images. To identify the flame front using two dimensional images, a method of image tomography is applied. A tomography of the

貨物