Titlebook: Advances in Mechanism and Machine Science; Proceedings of the 1 Masafumi Okada Conference proceedings 2024 The Editor(s) (if applicable) an

Legend

移動

Carl-Friedrich B?digheimer,Ulrike Tillmannline. The model reveals the instantaneous inequality between the output angle and flexspline tooth rotation angle. Firstly, the kinematic model is established with consideration of the flexspline cup deformation. Then, the instant rotation center and centrode of the flexspline tooth are systematical

綁架

https://doi.org/10.1007/BFb0059162 meshing process. To this end, the geometric interference and impact caused by errors and load deformations during the alternating meshing process of multiple tooth flank pairs were studied. First, the condition for controlling the transmission error of the line contact spiral bevel gear pair withou

前面

Cohomological Topics in Group Theorydrives is more stringent due to their complex structure. Based on the involute geometry, a gear mesh analysis model is developed. From this model, the essential conditions for correct assembly of CSPG set and design guidelines are proposed. Under consideration of eccentric of carrier, the general eq

REP

GLADE

表皮

可能性

https://doi.org/10.1007/BFb0091516 the gear reducers reduce the speed of the motors, increase their resolution and multiply their torque. In applications where the accuracy and repeatability are critical, an antibacklash system is required to eliminate the clearance between gears and achieve greater accuracy. Additionally, high redu

一再煩擾

紳士