作者: 勉勵 時間: 2025-3-21 21:19
objective of the Permanent Committee for Stress Analysis (PC SA) is to promote the organization of conferences with the purpose disseminating new research and new measuring techniques as well as improvements in existing techniques, and furthermore, to promote the exchange of experiences of practical applicat978-94-010-8465-9978-94-009-4416-9作者: eulogize 時間: 2025-3-22 01:43 作者: blackout 時間: 2025-3-22 06:12
Pressure Measurements on Spatially Curved Elastic Surfaces during Crash Tests,d, using the well known pressure foil procedure for measuring the pressure to which the dummies are subjected in crash tests, in order to obtain information on the injury risk presented by interior equipment in passengers cars as well as information on the effect of protective systems.作者: Paradox 時間: 2025-3-22 10:16
https://doi.org/10.1007/978-3-658-21439-5g. ship plating) and there is a paucity of information regarding the integrity of plated structures operating at depths in excess of 50 metres. The validity and economy of using small-scale model testing in this field has been well-established (3), provided that sufficient care is taken in the desig作者: 連鎖,連串 時間: 2025-3-22 15:10
Hausarbeit und taylorisierte Arbeit,d, using the well known pressure foil procedure for measuring the pressure to which the dummies are subjected in crash tests, in order to obtain information on the injury risk presented by interior equipment in passengers cars as well as information on the effect of protective systems.作者: 連鎖,連串 時間: 2025-3-22 20:47 作者: colostrum 時間: 2025-3-22 22:04
Gert Pickel,Verena Schneider,Oliver Deckerof 150 bar. The cylinder is shut with the quick-release valve in which a riser (dip tube) is screwed. The liquid carbon-dioxide (about 45 kg) is contained in the cylinder with a pressure of about 60 bar at room temperature.作者: GUILE 時間: 2025-3-23 04:40 作者: 鉤針織物 時間: 2025-3-23 09:05 作者: 毛細(xì)血管 時間: 2025-3-23 13:29 作者: enlist 時間: 2025-3-23 16:46 作者: 一美元 時間: 2025-3-23 18:01 作者: 營養(yǎng) 時間: 2025-3-23 22:21
Gesellschaft, Organisation, Professionalit?tnd kinetic) variables of movement only has nevertheless led to many important findings regarding the interplay between active (muscle generated), passive and inertial forces and moments of forces the body is constrantly being subjected to in the course of various movement patterns.作者: 迫擊炮 時間: 2025-3-24 04:20
Jasmin Dierkes,Moritz von Stettenortance of various design parameters. This model has proven to be an important tool for optimizing the design. Test measurements show the experimentally determined transducer characteristics to be in good agreement with model predictions and the transducer to come up to expectations.作者: Minuet 時間: 2025-3-24 08:39 作者: 小爭吵 時間: 2025-3-24 12:55
Metallic Structures Under Mechanical and Cyclical Thermal Loading,The identification of the different models is made from monotonous and cyclic characterisation tests according to temperature..The comparison of the test results with those stemming from calculation allows a better comprehension of the thermoelastoplastic behaviour of the structure.作者: 粗野 時間: 2025-3-24 16:58 作者: 提名 時間: 2025-3-24 21:23
,Micro-Computer Based Measurement and Processing Method for Human Locomotor System’s Take-Off Propernd kinetic) variables of movement only has nevertheless led to many important findings regarding the interplay between active (muscle generated), passive and inertial forces and moments of forces the body is constrantly being subjected to in the course of various movement patterns.作者: Working-Memory 時間: 2025-3-25 02:19
Redesign and Development of a Force Transducer of the Buckle Type,ortance of various design parameters. This model has proven to be an important tool for optimizing the design. Test measurements show the experimentally determined transducer characteristics to be in good agreement with model predictions and the transducer to come up to expectations.作者: 同步信息 時間: 2025-3-25 04:57 作者: 去才蔑視 時間: 2025-3-25 10:53
Techniques in Experimental Stress Analysis for Reinforced Concrete Structures,ntal work using this technique are given and typical results presented to demonstrate its successful performance. The use of embedment strain gauges to measure strains in the concrete is also described. Future developments are indicated.作者: 敵手 時間: 2025-3-25 14:29 作者: –scent 時間: 2025-3-25 18:15 作者: 我的巨大 時間: 2025-3-25 23:46 作者: decipher 時間: 2025-3-26 03:11 作者: 可行 時間: 2025-3-26 08:04
Response of Spherical Shells Under Apex Load to Varying Proportions,over a small circle at the apex and pinned-edge-conditions have been considered. Spherical segments are investigated analytically by the force method, numerically by implementing the finite element method and experimentally by means of electrical resistance strain gages. Apex loads inside the shallo作者: Cleave 時間: 2025-3-26 11:32
Study of Stress Distribution in the Walls of Vessel Containers for High - Pressure Gas,e compressed,liquefied or dissolved gas (oxygen,nitrogen,argon,carbon dioxide,various combustible gas etc.).They belong to the category of curved plates with reduced thickness,that’s why,when dwelling them on,it is considered that the container walls behave like a membrane, i. e. they can take over 作者: 公理 時間: 2025-3-26 14:33
Experimental Stress Analysis with Automation of MeasureMents and Data Processing Using Vibro-Wire G industrial buildings. This development imposed high requirements upon the designer, as well as on the construction firms. Irrespective of recent methods of computer aided design, it is still very necessary to check the quality of structures, verify their static and dynamic behaviour, carry out long作者: 貪婪地吃 時間: 2025-3-26 20:52 作者: BOLUS 時間: 2025-3-26 23:17 作者: 變異 時間: 2025-3-27 03:31
Experimental Stress Analysis at Plastic Deformations, for analysing the state of stress at plastic deformation during the forming process. Little success was reached hitherto with exact analytical solution of that problem; for this reason, solution by means of the methods of experimental analysis of stress presents a valuable contribution in this fiel作者: Immobilize 時間: 2025-3-27 08:17 作者: 反對 時間: 2025-3-27 10:03
Buckling of Axially Compressed Imperfect Cylinders and Ring Stiffened Cylinders Under External Preshavior of cylindrical shells under axial loading or lateral pressure..Specific measurement systems are necessary for these types of tests. In particular, we describe an original application of the projected fringes method to the case of a complete cylindrical shell. Also experimental results are pre作者: ARENA 時間: 2025-3-27 15:11
Redesign and Development of a Force Transducer of the Buckle Type, tissue structures around the elbow joint. This new design involves size reduction and elimination of false output sources as well as the development of a special tool for the proper installation of the transducer. A mechanical model of the buckle transducer has been developed to investigate the imp作者: 解凍 時間: 2025-3-27 20:03
Determination on Forces and Moments in Pipe Cross-Sections: Fitting of Experimental Strain Measuremmeters must be bigger, thus exerting not-well-known forces and moments on the main components of the feedwater heating system particulary on pumps. It is useful to verify that these efforts are in agreement with the designing requirements of the secondary system.作者: ARIA 時間: 2025-3-28 00:34
Pressure Measurements on Spatially Curved Elastic Surfaces during Crash Tests,(HIC) was developed for evaluation and comparison of variants as well as for establishment of a basis for legislation. The HEAD INJURY CRITERION is a combined evaluation factor which includes the acceleration on the inside of a dummy head as a primary characteristic. As described in (1) this factor 作者: 相反放置 時間: 2025-3-28 04:29 作者: 注入 時間: 2025-3-28 09:53 作者: 想象 時間: 2025-3-28 12:54 作者: 廢除 時間: 2025-3-28 16:15
https://doi.org/10.1007/978-3-662-54292-7Used since the remotest antiquity, the bonded assemblage has been developed in the technological field since the beginning of the 20th century.作者: 輕浮女 時間: 2025-3-28 22:50
https://doi.org/10.1007/978-3-658-03390-3The growth of the chemical industry in Romania during the last two decades has led to the development of large petrochemical plants. These plants have been provided with storage tanks such as the 1000 m. spherical steel tanks for propylene.作者: 撤退 時間: 2025-3-29 00:28 作者: ascend 時間: 2025-3-29 03:10 作者: Encoding 時間: 2025-3-29 08:37
BMFT - Risiko- und SicherheitsforschungThe primary cause of a major structural failure was attributed to the loosening of a threaded connection secured by a lockring. Investigation of this problem has involved both experimental and analytical studies of the way in which external load is transferred through a thread previously preloaded by tightening a lockring with a prescribed torque.作者: 使成核 時間: 2025-3-29 13:27
Measure and Design of Stresses in Adhesive Bonded Trusses: Extensometrical and Laser-ElasticimetricUsed since the remotest antiquity, the bonded assemblage has been developed in the technological field since the beginning of the 20th century.作者: Constrain 時間: 2025-3-29 15:35
The Experimental Analysis of the Stress Distribution in a 1000m3 Spherical Steel Tank From the PetrThe growth of the chemical industry in Romania during the last two decades has led to the development of large petrochemical plants. These plants have been provided with storage tanks such as the 1000 m. spherical steel tanks for propylene.作者: 紅腫 時間: 2025-3-29 23:11
Small-Scale Testing of End-Restrained Tubular Beam-Columns,It has been common practice in the design of tubular columns to assume an “effective lenght factor” which is intended to include the effects of end restraints. Usually this factor is in the range of 0.8 to 1.0 but there is little experimental evidence to support this.作者: 圓木可阻礙 時間: 2025-3-30 00:34
Experimental and Theoretical Research into the Collision Resistance of Inland LPG-Carriers,When LPG is transported by inland-waterway carriers, the collision resistance of these vessels is crucial for the determination of risk factors of this type of transport. Essential as to this determination is to establish which penetration depths give rise to leakage of the gas tanks in these vessels.作者: nonradioactive 時間: 2025-3-30 07:14 作者: Gullible 時間: 2025-3-30 09:47
Probleme der Wirtschafts- und Sozialpolitikoped namely for the requirements of quality control. The test for each material parameter is typically performed on a special test specimen. For example, the concrete strength is tested on cubes or cylinders, the modulus of elasticity on prismatic specimens, etc. The measuring devices are often not 作者: Gourmet 時間: 2025-3-30 16:23
Sabine Pfeiffer,Petra Schütt,Daniela Wührn..An original experimental device was conceived and carried through in order to apply to thin stainless steel cylinders a tension and an axial cyclic gradient of temperature of variable intensity..Numerical calculations are made by taking into account several models of the material behaviour laws. 作者: SLUMP 時間: 2025-3-30 16:37
https://doi.org/10.1007/978-3-322-85649-4over a small circle at the apex and pinned-edge-conditions have been considered. Spherical segments are investigated analytically by the force method, numerically by implementing the finite element method and experimentally by means of electrical resistance strain gages. Apex loads inside the shallo作者: corporate 時間: 2025-3-30 22:20 作者: tenuous 時間: 2025-3-31 02:01
Quellen- und Literaturverzeichnis, industrial buildings. This development imposed high requirements upon the designer, as well as on the construction firms. Irrespective of recent methods of computer aided design, it is still very necessary to check the quality of structures, verify their static and dynamic behaviour, carry out long作者: 腫塊 時間: 2025-3-31 08:42 作者: 阻塞 時間: 2025-3-31 10:10
https://doi.org/10.1007/978-3-531-93266-8resistance strain gauges installed in a milled duct within the reinforcement to avoid degredation of the steel/concrete interface. Details of experimental work using this technique are given and typical results presented to demonstrate its successful performance. The use of embedment strain gauges t作者: adduction 時間: 2025-3-31 14:00 作者: PAD416 時間: 2025-3-31 18:30 作者: notice 時間: 2025-3-31 23:02 作者: 決定性 時間: 2025-4-1 03:46 作者: AGOG 時間: 2025-4-1 09:23
https://doi.org/10.1007/978-3-658-13271-2meters must be bigger, thus exerting not-well-known forces and moments on the main components of the feedwater heating system particulary on pumps. It is useful to verify that these efforts are in agreement with the designing requirements of the secondary system.
