作者: GROSS 時間: 2025-3-21 23:35 作者: 不溶解 時間: 2025-3-22 03:09 作者: Bumptious 時間: 2025-3-22 05:01
Technologie für Stuckateure und Trockenbauerath was head injuries. There is a lack of studies about face injuries in children due to a crash impact. The present research focuses on the design of an innovative test bench capable to assess damage in children during a vehicular collision trying to simulate a facial frontal impact. FMVSS 208 stan作者: preservative 時間: 2025-3-22 12:38
Deckenbekleidungen und Unterdecken,that by using scientific tools such as MATLAB and visualization for drowsiness detection of drivers. Scientific visualization is a tool that is used to present the basic idea of the proposed algorithm. The final goal of this research is to detect the driver’s sleeping state, which then can be used a作者: 含糊 時間: 2025-3-22 14:22
https://doi.org/10.1007/978-3-322-84239-8lready complex system being difficult to control the handling and especially the vehicle lateral load transfer. Factors such as handling as well as vibrations are primordial, since a more rigid structure implies smaller prototype deformation along the path. The torsional stiffness relates to the tor作者: 含糊 時間: 2025-3-22 19:21 作者: Ataxia 時間: 2025-3-22 23:07 作者: 對手 時間: 2025-3-23 04:48 作者: 金哥占卜者 時間: 2025-3-23 08:50 作者: 煞費苦心 時間: 2025-3-23 13:40 作者: 情感脆弱 時間: 2025-3-23 14:15 作者: 鉤針織物 時間: 2025-3-23 19:01 作者: 他姓手中拿著 時間: 2025-3-23 22:30
Technologie-Praxis ?Angepa?te Technologie“ear variation of the cross section. The objective of the present investigation is to express the fundamental axial angular vibration frequency . by a closed-form equation that takes account of the taper degree. For this purpose, the first mode shape function of the axial vibration of a uniform rod i作者: BARB 時間: 2025-3-24 02:26
Softwaregestütztes Technologie-Roadmappingy an infinitely rigid beam supported by two columns is used to establish the dynamic equilibrium equation. The analyzed single degree of freedom noted 1-DOF in this contribution considers different heights for the columns while a torsion spring is disposed at the first column base. Thus, the lateral作者: 震驚 時間: 2025-3-24 09:38
Grundlagen des Technologie-Roadmappingstudy the particular case of a uniform beam fixed at its left end and elastically restrained at the right end by two springs . and .. The latter are relative to the vertical translation and the rotation. The investigation consists of analyzing the influence of . and . on the uniform beam vibration b作者: 無能性 時間: 2025-3-24 12:03 作者: HAIL 時間: 2025-3-24 15:58
Stahlsorten, Stahl- und Eisenwerkstoffeubjected to axial tensile forces. When analysing such structures, the application of detailed 2D or 3D finite element meshes is undoubtedly the best solutions possible. However, in inverse identification of potential cracks such comprehensive models are actually not the most suitable solutions. Ther作者: 夜晚 時間: 2025-3-24 21:59
Halbzeug- und Preformtechnologien,imum manufacturing conditions and the mechanical properties of the sandwich panels were predicted by finite element analysis. Sandwich panels were subjected to room temperature tensile test, bend test, formability test (stretching test) and tensile computer simulation to obtain basic data for applic作者: Fallibility 時間: 2025-3-24 23:30
https://doi.org/10.1007/978-3-322-86322-5 are conducted to investigate the effect of four process parameters, i.e., peak current (.), pulse on-time (.), polarity, and electrode material, on the machining process. The machining process is evaluated by the material removal rate (MRR), electrode wear ratio (EW%), and surface roughness (SR) as作者: 運氣 時間: 2025-3-25 06:07
Andreas ?chsner,Holm AltenbachDiscusses interaction between classical engineering and the health and medical sector.Presents processes to achieve lighter structures.Describes how to optimize operational costs and lower harm for th作者: pacific 時間: 2025-3-25 07:29 作者: bourgeois 時間: 2025-3-25 15:41 作者: VEN 時間: 2025-3-25 16:35
Engineering Design Applications III978-3-030-39062-4Series ISSN 1869-8433 Series E-ISSN 1869-8441 作者: Impugn 時間: 2025-3-25 20:01 作者: CLOWN 時間: 2025-3-26 03:23
Technologie, Wachstum und Besch?ftigungnsidered as penalty parameters. The procedure explained in the NUREG 6909 was followed. The results showed that the environmental conditions increased the cumulative usage factor, in comparison with those calculated in dry conditions.作者: EXTOL 時間: 2025-3-26 04:48 作者: 使成波狀 時間: 2025-3-26 10:55
Stahlsorten, Stahl- und Eisenwerkstoffeion. The second part of the research discussed is devoted to modelling of the phenomenon by the simple one-dimensional beam finite element. Afterwards, the implementation and the quality of the results are being presented through a comparative case study that complements the derivations.作者: CESS 時間: 2025-3-26 15:54
Halbzeug- und Preformtechnologien,ylene and sandwich plate showed similar results to experimental results. Also, the predicted bending test results of the sandwich plate showed similar values to those of the experimental results, and it was possible to predict the characteristics of the sandwich panels.作者: white-matter 時間: 2025-3-26 16:50 作者: 吵鬧 時間: 2025-3-26 22:16 作者: calumniate 時間: 2025-3-27 02:45
Environmental Fatigue Analysis of the Feedwater Piping System of a BWR-5,nsidered as penalty parameters. The procedure explained in the NUREG 6909 was followed. The results showed that the environmental conditions increased the cumulative usage factor, in comparison with those calculated in dry conditions.作者: 文件夾 時間: 2025-3-27 08:24
Structural Vibrations in a Building of a Nuclear Power Plant Caused by an Underground Blasting,arthquake (SSE) response spectrum and the operating basis earthquake (OBE) response spectrum. The results show that the seismic response spectrums envelop the explosion response spectrum. A resonance did not develop. The horizontal velocity is below the limits established by the regulations consider作者: SUE 時間: 2025-3-27 10:01 作者: Pander 時間: 2025-3-27 17:01
Mechanical Properties and Formability Evaluation of AA5182-Polypropylene Sandwich Panels for Big Daylene and sandwich plate showed similar results to experimental results. Also, the predicted bending test results of the sandwich plate showed similar values to those of the experimental results, and it was possible to predict the characteristics of the sandwich panels.作者: 葡萄糖 時間: 2025-3-27 17:45 作者: LEER 時間: 2025-3-28 01:30
Antigravity Device for Intravertebral Rehabilitation, para Investigar la Posible Etiología Laboral del Síndrome Doloroso Lumbar, Propuesta de Control. Universidad Instituto Politécnico Nacional, p. 13, 2010 [.]). In this research is presented an antigravity rehabilitation device, which is designed to allow the intervertebral decompression and the anti作者: 大方一點 時間: 2025-3-28 05:07 作者: 安撫 時間: 2025-3-28 06:42 作者: 使乳化 時間: 2025-3-28 13:36 作者: 分開 時間: 2025-3-28 15:20 作者: 憲法沒有 時間: 2025-3-28 20:39 作者: paroxysm 時間: 2025-3-29 01:14 作者: 香料 時間: 2025-3-29 05:57
Analysis of an Aircraft Impact on a Dry Storage Cask of Spent Nuclear Fuel,s an internal stainless steel cylinder. Its main function is to provide a barrier against radiation, to cool down the spent fuel and to avoid nuclear fission through the internal metallic surface that contains the radioactive material. This vessel has been designed to withstand different conditions 作者: Cerebrovascular 時間: 2025-3-29 08:14
Review of Electromagnetic Compatibility on Digital Systems of Nuclear Power Plants,onsiderably recently, due to the replacement of analog with digital equipment. It is a consequence of the development of new technologies, which are more susceptible to interference. In addition, more attention is required to electromagnetic compatibility (EMC) in the designs, as well as the tendenc作者: 策略 時間: 2025-3-29 12:15
Effect of Beam Rigidity on the Lateral Stiffness of a One-Storey Frame,e of a one-storey one-bay frame. The displacement method is used to formulate the global stiffness matrix of the frame. The treated problem consists of applying a lateral force at the storey to obtain its displacement and deduce the lateral stiffness. It is found that the lateral stiffness of the fr作者: exorbitant 時間: 2025-3-29 19:37
Fundamental Transverse Vibration Circular Frequency of a Cantilever Beam with an Intermediate Elastwere considered. The objective of the present study is to investigate the fundamental transverse vibration circular frequency . of a cantilever beam with an intermediate elastic support of variable abscissa .. The analysis is based on the Euler–Bernoulli assumptions and carried out by using the fini作者: accrete 時間: 2025-3-29 22:53
Axial Fundamental Vibration Frequency of a Tapered Rod with a Linear Cross-Sectional Area Variationear variation of the cross section. The objective of the present investigation is to express the fundamental axial angular vibration frequency . by a closed-form equation that takes account of the taper degree. For this purpose, the first mode shape function of the axial vibration of a uniform rod i作者: Allure 時間: 2025-3-30 03:27 作者: 粗俗人 時間: 2025-3-30 06:44
Vibration Analysis of a Uniform Beam Fixed at One End and Restrained Against Translation and Rotatistudy the particular case of a uniform beam fixed at its left end and elastically restrained at the right end by two springs . and .. The latter are relative to the vertical translation and the rotation. The investigation consists of analyzing the influence of . and . on the uniform beam vibration b作者: Soliloquy 時間: 2025-3-30 08:48
Fundamental Vibration Periods of Continuous Beams with Two Unequal Spans,ve of this study is to determinate the fundamental transverse vibration period . of two-span beams having an intermediate support of varying abscissa. Various boundary conditions at the extreme ends of the analyzed continuous beams are considered. The analysis was conducted by the finite element met作者: Peculate 時間: 2025-3-30 16:23
Transverse Displacements of Transversely Cracked Beams with a Linear Variation of Width Due to Axiaubjected to axial tensile forces. When analysing such structures, the application of detailed 2D or 3D finite element meshes is undoubtedly the best solutions possible. However, in inverse identification of potential cracks such comprehensive models are actually not the most suitable solutions. Ther作者: 一再困擾 時間: 2025-3-30 18:26
Mechanical Properties and Formability Evaluation of AA5182-Polypropylene Sandwich Panels for Big Daimum manufacturing conditions and the mechanical properties of the sandwich panels were predicted by finite element analysis. Sandwich panels were subjected to room temperature tensile test, bend test, formability test (stretching test) and tensile computer simulation to obtain basic data for applic作者: Laconic 時間: 2025-3-31 00:08 作者: 涂掉 時間: 2025-3-31 02:30
Geometrical Characterization of a Lumbar Spine, such as Arduino or NANO.. The anthropometric characteristics of Mexican individuals have been taken into consideration. This device can be used with young and adult patients. Preliminary results have been discussed.作者: Defense 時間: 2025-3-31 07:55 作者: 歹徒 時間: 2025-3-31 13:16 作者: 抗生素 時間: 2025-3-31 16:54
J?rg Freiling,Thomas Baron M. Sc. oscillations shows that both damper and friction resistance at the bolt play a role regarding the dynamics of a ropeway vehicle passing a support. The results allow the development of accurate computational tools for future simulation tasks.作者: construct 時間: 2025-3-31 18:18
Deckenbekleidungen und Unterdecken,n initial stage of sleeping is detected, the vehicle’s computer should override manual control and stop the car as soon as possible. A similar system can be used aboard ships, trains or airplanes. Research of this topic results in big data, which could be hard to understand without proper visualization techniques.作者: embolus 時間: 2025-3-31 22:26 作者: 雀斑 時間: 2025-4-1 01:55 作者: AWE 時間: 2025-4-1 09:48 作者: 輕率看法 時間: 2025-4-1 10:13
Grundlagen des Technologie-Roadmappinglidation for which a good agreement was noted. Thereafter, it was extended to take into account the effect of the two springs acting simultaneously. The results are summarized under the form of plotted curves representing the variations of the angular vibration frequency . as a function of both the . and . values.作者: 和音 時間: 2025-4-1 15:42
https://doi.org/10.1007/978-3-322-86322-5alyzed, and the results showed that the graphite electrode with negative polarity leads to the highest MRR, whereas the brass electrode with positive polarity leads to the lowest SR. Using a copper electrode with positive polarity resulted in the lowest EW%, while copper with negative polarity led to an instability in the process.
